Fourteen people in Kraków who make light fittings and the keys that run them.
Skenara Systems is a manufacturer. We draw, machine, assemble and program our own hardware, we design the light itself, and we integrate everything else a house needs from whoever makes it best.
The boring facts, in one place.
- Registered
- Skenara Systems sp. z o.o.
- Where
- Kraków, Poland
- Since
- 2021 — lighting design first, own hardware from 2023
- People
- 14 · four of them on the bench
- KNX
- Member manufacturer · code 0x00F4
- Warranty
- 5 years hardware · 10 years spare parts
Three things we make, one thing we write, and a long list we integrate.
The distinction matters more than it sounds: it decides who answers the phone when something stops working.
The fittings
One LED platform, three bodies. Our driver choice, our binning, our warranty.
The keys
Machined plates, our circuit, our firmware, our casing. Core and Pro on the same wall box.
The board module
Four DIN units that hold the dimming, the scenes and the astronomical clock.
The lighting design
Layers, scenes and levels per room. The part nobody can buy from a catalogue.
Gateways, drivers, relays, climate, shading, locks and sensors we specify and commission but do not manufacture — and we say so on the quote, per item.
Because the visible layer is what people judge a house by.
Most of this industry sells the machinery behind the wall — panels, gateways, servers, a folder of manufacturer warranties. The person who lives there never sees any of it. They see light, and they touch a key.
So we decided to own exactly that: the light, the key, and the way the two behave together at seven in the evening in November. Everything behind the wall still has to be right, and we build it properly — but it is not what anyone judges a home by.
We have nothing to show you yet, and we will not pretend otherwise.
Three houses are in progress and none has been handed over. When the first one is, this page will carry it — with the electrician named, the fitting count, the real cost and the two things we would do differently.
What will be published
Photographs taken after dark, at the levels the family actually uses. The fitting and key count. The final cost, not the estimate.
What will not be
Renders. Daytime photos with every light on. Square-metre figures with no scope attached.
Until then
Come to the demo room in Kraków after dark, or ask for the reference of the project closest to yours and speak to the owner without us in the room.
Kraków, and the door is a real door.
The workshop and the demo room are the same address. Visits happen after dark by arrangement — a demo room lit at two in the afternoon proves nothing.
- Workshop and demo room
- ul. Zabłocie 23, 30-701 Kraków
- Hours
- Mon–Fri, 9:00–18:00 · demo visits after sunset
- Post and invoices
- Same address · NIP on request
Talk to a person, not a form.
One engineer answers, and it is the same one who will be in your house after dark. WhatsApp is the fastest — usually inside a working day, and never a call centre.
- 01You send the planA PDF, a photo of the drawing, or nothing at all — we can start from a room count.
- 02We read it and call onceForty minutes. You get the count of fittings, the count of keys and where the board goes.
- 03You keep the drawingYours whether you buy from us or not. That is what makes it worth your hour.