Energy, per circuit, with history.
Metering at circuit level rather than at the meter, with monthly history in the app, so a bill that jumps can be explained in an afternoon instead of argued about for a month.
We integrate thisBest device on the market, specified and commissioned by us. We answer for compatibility, not for the badge on it.
What you can actually see.
Circuit-level metering
Current transformers on the circuits worth watching: AC, pool plant, kitchen, irrigation.
Monthly history
Twelve months held locally, exportable, so a change year on year is visible.
Alerts on a jump
A threshold per circuit, so a failing pool pump shows up as a number before it shows up as a bill.
Handover baseline
We record the first month as a baseline, which is what makes a later comparison mean anything.
What we do not do
This is sub-metering for your own information; not a legalised MID-certified revenue meter, so it cannot be used to bill a tenant. Apple Home and Google Home do not read metering at all — see the compatibility page.
Four levels of detail.
More granularity costs board space and CTs, not software. Pick the level that answers questions you will actually ask.
Whole-house incomer
One measurement at the main breaker. Enough to see a monthly trend and nothing else — useful, but it cannot tell you which circuit changed.
Per-circuit
A current transformer on each circuit worth watching: AC, pool plant, kitchen, irrigation, EV charger. This is the level at which a bill can actually be explained.
Plant-room sub-metering
Pumps, chillers and filtration measured separately from the house, so a failing pump shows up as a rising number weeks before it shows up as a failure.
Solar and battery
Where they exist: generation, self-consumption and export read alongside the load, which is the only way to know whether an array is doing what it was sold as doing.
Five things the board decides.
Metering is mostly a physical problem. The software is the easy half.
CT size must match the breaker
A current transformer rated well above the circuit reads noise at low load. Sized per circuit against the actual breaker, not bought in one size for the house.
Board space for CTs at first fix
Each CT needs room around its cable. A board that was sized without metering has no space to add it later, and a second board is a wall and a day of work.
The baseline month is the whole point
We record the first full month at handover. Without it there is nothing to compare a later change against, and every claim about savings is an opinion.
This is not a billing meter
Sub-metering is for your own information. Billing in Poland requires a legalised MID-certified meter owned by the grid operator, so this cannot settle a tenant’s bill or a service charge.
Two platforms cannot read it
Apple Home and Google Home do not expose energy at all, and Alexa reads part of it. Metering lives in the Skenara app until that changes — see the compatibility page.
The numbers for this function.
What we commit to in writing, so it can be checked against a drawing rather than taken on trust.
- Resolution
- Per circuit, 1-minute samples
- History
- 12 months, held locally
- Board
- DB-36 + M
- Export
- CSV from the app
All functions
Send us the ceiling plan.
Forty minutes, free, no obligation. You will get the fitting count we would use, where the light falls short, and a straight answer about whether you need us at all.
- 01You send the planA PDF, a photo of the drawing, or nothing at all — we can start from a room count.
- 02We read it and call onceForty minutes. You get the count of fittings, the count of keys and where the board goes.
- 03You keep the drawingYours whether you buy from us or not. That is what makes it worth your hour.
